Example of use IS1:
Portable IS testing device
Requirement:
Portable insulation resistance testing device for use at a test bench or as a mobile unit. This example shows a typical configuration for this application.
Description | Number | Article No. |
Insulation resistance tester 50..1000 VDC | 1 | 90-4K |
Housing |
1 | 30-6M |
Calibration | 1 | 90-4K E99 |
Example of use IS2:
Use in automated test systems
Requirement:
PE conductor testing device for use in automated systems. A 19”-module rack allows the installation in a switching cabinet. You can find additional useful components such as test sensors and extra blank panels in our accessories program.
Description | Number | Article No. |
Insulation resistance tester 50..1000 VDC | 1 |
90-4K |
Module rack with 24-pole system plug; unwired | 1 | 94-1R |
Blank panel 12 TE |
1 |
40-1A |
Blank Panel 36 TE | 1 | 40-1D |
Calibration | 1 |
90-4K E99 |
Example of use IS3:
Combined PE and IS test
Requirement:
Test system for combined PE conductor and insulation resistance measurement in a practical portable housing. This unit is also available in a model with separate measurement functions. You can find additional useful components such as test sensors and extra blank panels in our accessories program.
Description |
Number | Article No. |
PE conductor tester 12 VAC; 10..25A |
1 |
90-2A |
Insulation resistance tester 500 VDC; 10 / 100 MOhm |
1 |
90-2E |
Blank panel 12 TE |
1 |
40-1A |
Housing (combined measurement) | 1 |
30-6R |
PE test probe 2m cable length | 1 |
94-4S |
Calibration | 1 | 90-2A E99 |
Calibration | 1 |
90-2E E99 |