Example of use KH1:
Manual operated test bench PE / IS / HV
Requirement:
Setup of a PE / IS / HV test bench for manual testing. This example shows a typical configuration for this application. Device components and accessories tailored to needs ideally complement each other.
Description | Number | Article No. |
Combination tester incl. switching field |
1 | F7-1A |
DC extension module | 1 | F7-1A E01 |
IS extension module |
1 | F7-1A E02 |
Housing19" / 6 HU |
1 | 93-1C |
Guide rail set |
1 | 93-1F |
High voltage test probe 6m cable length |
1 | 94-2A Z06 |
Protective earth conductor probe 6m cable length | 1 | 94-4S Z06 |
Connection box 2.5m cable length |
1 | F9-7A Z02 |
Manual start button 6m cable length |
1 | F9-1W |
Warning lamps tabletop housing | 1 | 94-2C |
Calibration | 1 | F7-1A E99-02 |
Example of use KH2:
Use in automated test system PE / IS / HV
Requirement:
Integration of a combination tester in an automatic system. We offer partners (OEM) tailored solutions for typical automatic use. You will find other useful components such as plug connectors and relays in our range of accessories.
Description |
Number |
Article No. |
Combination tester incl. switching field | 1 |
F7-1M |
System plug connector 7-pole |
1 |
94-2N Z002 |
Warning lamps column version with magnet base |
1 |
F9-1A |
Calibration | 1 |
F7-1A E99 |
Example of use KH3:
Manual operated test bench PE / IS / HV equipped with test chamber
Requirement:
Setup of a PE / IS / HV test bench with compulsatory protection against contact. In combination with our test chambers, ready-to-plug-in solutions can be producted that increase operating safety to a maximum.
Description | Number |
Article No. |
Combination tester incl. switching field | 1 |
F7-1A |
Housing 19" / 6HU |
1 |
93-1C |
Guide rail set | 1 |
93-1F |
Test chamber with pivoting protective hood |
1 |
94-3A ZF1 |
Calibration | 1 |
F7-1A E99 |
Example of use KH4:
Mobile test solution PE / IS / HV
Requirement:
Setup of a mobile PE / IS / HV test bench for manual testing. This example shows a typical configuration for this application. Device components and accessories tailored to needs ideally complement each other.
Description | Number | Article No. |
Combination tester incl. switching field | 1 | F7-1A |
Housing 19" / 6 HU |
1 | 93-1C |
Guide rail set | 1 | 93-1F |
High voltage test probe 6m cable length | 1 | 94-2A Z06 |
Protective earth conductor probe 6m cable length | 1 | 94-4S Z06 |
Connection box 2.5m cable length | 1 | F9-7B Z02 |
Manual start button 6m cable lengt (instead of foot switch) |
1 | F9-1W |
Warning lamps column version with magnet base | 1 | F9-1A |
Calibration | 1 | F7-1A E99-02 |
Test mobile |
1 | T0-1T Z13 |