Order number: G1-1N.3 | | | | | |||||||
High voltage tester G1-1N
fully electronic
For automated use only
- Test voltage 0.05 .. 6.00 kVDC
grounded - Tripping current 0 .. 20 uA / 200 uA/ 2.00 mA
Available expansion modules:
- Insulation resistance measurement
- Additional digital outputs
- Voltage readback
HV test
• Test voltage (general): 50 .. 6000 VDC
• Ramp function: 10 .. 1000 V/s
• Tripping current: 0 .. 20/200uA / 2mA
• Current limitation according to EN50191
• Tripping current programmable
• Test time: 0.5 .. 999.9 s
• Output power
• Contact monitoring by reading the minimum current
• Contact monitoring by reading the test voltage
Display / Operation
• device control via interface only
Interfaces
• ethernet-interface
• RS 232C-interface (optional)
• USB-interface (optional)
Equipment data
• Mains voltage: 230 +/- 10%
• Safety class: II
• Slide in technique: 19"
• Depth/ Width/ Height: B = 483, T = 360, H = 177 mm
• Height : 4 HU
Extensions / Options
• Extension module with 6 digital outputs (optional)
• Extension Module Voltage Feedback for contact monitoring (optional)
• Extension Module Insulation resistance test – (DC required) (optional)
Order data
• Order description: High voltage tester DC
• Order number: G1-1N.3
This device variant allows a test system to be configured for automated high voltage tests as well as (optionally) for measuring PE conductor and insulation resistance in systems, parts and components.
For technical details, please request our product data sheet.
