Order number: F1-1N.3 | | | |||||||||
High voltage tester F1-1N
fully electronic, modularly expandable
For automated use only
- Test voltage 0 .. 3,500/7,000 VAC
potential-free - Tripping current 0 .. 1/10/70 mA
Available expansion modules
- Measurement of insulation resistance (option)
- Test voltage 0 ..4,500/9,000 VDC (option)
- Voltage readback (option)
- Additional digital outputs (option)
- Burn mode (option)
HV test
• Voltage loating
• Test voltage (general): 200 .. 3.500 / 7.000 VAC
• Ramp function: 10 .. 3500 V/s
• Tripping current: 0 .. 1/10/70 mA
• Tripping current programmable
• Delta - I Detection
• Test time: 0.5 .. 999.9 s
• Output power: 500 VA
• Voltage output via high voltage jacks at front / rear panel
• Contact monitoring by reading the minimum current
• Suitable for high voltage test with item under operation (HV-Warm)
Display / Operation
• switchable to national language
• device control via interface only
Interfaces
• ethernet-interface (optional)
• RS 232C-interface
• USB-interface (optional)
Equipment data
• Mains voltage: 230 +/- 10%
• Safety class: I
• Slide in technique: 19"
• Depth/ Width/ Height: B = 483, T = 360, H = 177 mm
• Height : 6 HU
Extensions / Options
• Factory calibration certificate (optional)
• Extension Module Burn (burn out function for insulation faults) (optional)
• Extension module with 6 digital outputs (optional)
• Extension Module Safety Current Limitation (optional)
• Extension Module Voltage Feedback for contact monitoring (optional)
• Extension Module Insulation resistance test – (DC required) (optional)
• Extension Module 300 .. 4.500 / 9.000 VDC (optional)
• Extension Module Ethernet (alternative interface) (optional)
• Extension Module USB (alternative interface) (optional)
Order data
• Order description: High Voltage Tester for automated use
• Order number: F1-1N.3
